Wakesurf Edge Mega Wave Foldin @ $749.99

60 DAYS RETURN/EXCHANGE

60 DAYS RETURN/EXCHANGE

FREE FREIGHT ON ORDERS OVER $100

FREE FREIGHT ON ORDERS OVER $100

MON-FRI: 9am-5pm SAT: 9am-1pm

MON-FRI: 9am-5pm SAT: 9am-1pm

Menu
Search
Contact
07 33796933
0
Cart

Wakesurf Edge Mega Wave Foldin

Our Price $749.99
− +
View image 1 of 7
View image 2 of 7
View image 3 of 7
View image 4 of 7
View image 5 of 7
View image 6 of 7
View image 7 of 7
Liquid Force • Wake Shapers

Wakesurf Edge Mega Wave Foldin

Our Price $749.99
Seen it cheaper? Price Match
Description

Wakesurf Edge Mega Wave Foldin.....

Wakesurf Edge Mega Wave Foldin

The Liquid Force Wake Surf Edge Mega Wave will make big wakes BIGGER! Recommended for Boats 21’or longer. The WSE Mega 250 requires a mounting surface 5” tall by 12” long clear of hull steps greater than 3/8”. The WSE edge suction cups will accommodate hull curvature.

Description

Wakesurf Edge Mega Wave Foldin.....

Wakesurf Edge Mega Wave Foldin

The Liquid Force Wake Surf Edge Mega Wave will make big wakes BIGGER! Recommended for Boats 21’or longer. The WSE Mega 250 requires a mounting surface 5” tall by 12” long clear of hull steps greater than 3/8”. The WSE edge suction cups will accommodate hull curvature.

Features
  • HUGE WATER DISPLACEMENT WING
  • FOR MAXIMUM WAVE HEIGHT!
  • Largest Wake Shaper Face 14” x 18” = 252sq inch face
  • PATENTED CONCAVE WATER
  • CHANNELING WING
  • Our concave channeling wing surface pushes more water
  • to increase the length of the wave, while keeping the face
  • super clean!
  • SUPER STRONG SUCTION CUP
  • ATTACHMENT
  • Our 4.5 inch rubber suction cups won’t damage gel coat
  • or leave black markings on your boat.
  • EASY TO ADJUST ON THE FLY, NO UGLY
  • VELCRO OR SAFETY TETHERS REQUIRED.
  • Made with Durable Rust Free Materials . We Build the
  • WakeSurf Edge with impact resistant, lite weight glass filled
  • nylon and rust free stainless steel hardware. Our shaper is
  • long lasting; won’t rust or stain your boat.
  • BUILT IN FLOTATION
  • Don’t worry about your wake shaping investment sinking
  • to the bottom. The Wakesurf Edge wing is rotomolded and
  • sealed air tight.
  • MAKE THE MOST OF THE
  • MEGA WAKE SURF EDGE
  • Recommended boat 21’ or longer, have a 325hp engine or
  • greater, and 2000 pounds of factory and/or Sumo water
  • ballast system. Level load your boat to keep the nose down
  • for the captain’s visibility and a longer wake.
Shipping

We stock all products at our Brisbane store so they are ready for fast dispatch express & priority services are available at the checkout.

Exchanges & Returns

60 Days Exchange & Return with Easy and Fast Online Portal

A wake shaper attaches to one side of your boat's hull and pushes water to build a bigger, cleaner surf wave on the opposite side, so you can wakesurf without a rope. It shapes and lengthens the wave, and moving it across the hull lets you surf off the side you prefer.
Most wake shapers grip the hull with strong rubber suction cups that go on and off quickly without damaging the gel coat or leaving marks. Press it firmly onto a clean, flat section of the hull below the waterline and check it's stuck fast before setting off. Many float if they come loose.
Wake shapers suit inboard and V-drive boats and need enough length, power, and ballast to push a surfable wave. Bigger shapers are made for larger boats, while smaller ones help smaller boats and even some PWCs. Check the listing for the recommended boat size and the flat hull area the shaper needs.
Put the wake shaper on the side opposite the one you want to surf — it cleans up and enlarges the wave on the far side. To swap surf sides between goofy and regular, move the shaper to the other side of the hull. Some setups also let you fine-tune the wave's size and shape.
Rinse the wake shaper and its suction cups in fresh water after use and dry it before storing, keeping the cups clean so they keep their grip. Most shapers float and use rust-free hardware, but check the cups and wing for wear before each use and store it out of direct sun.
More details

Wakesurf Edge Mega Wave Foldin

  • HUGE WATER DISPLACEMENT WING
  • FOR MAXIMUM WAVE HEIGHT!
  • Largest Wake Shaper Face 14” x 18” = 252sq inch face
  • PATENTED CONCAVE WATER
  • CHANNELING WING
  • Our concave channeling wing surface pushes more water
  • to increase the length of the wave, while keeping the face
  • super clean!
  • SUPER STRONG SUCTION CUP
  • ATTACHMENT
  • Our 4.5 inch rubber suction cups won’t damage gel coat
  • or leave black markings on your boat.
  • EASY TO ADJUST ON THE FLY, NO UGLY
  • VELCRO OR SAFETY TETHERS REQUIRED.
  • Made with Durable Rust Free Materials . We Build the
  • WakeSurf Edge with impact resistant, lite weight glass filled
  • nylon and rust free stainless steel hardware. Our shaper is
  • long lasting; won’t rust or stain your boat.
  • BUILT IN FLOTATION
  • Don’t worry about your wake shaping investment sinking
  • to the bottom. The Wakesurf Edge wing is rotomolded and
  • sealed air tight.
  • MAKE THE MOST OF THE
  • MEGA WAKE SURF EDGE
  • Recommended boat 21’ or longer, have a 325hp engine or
  • greater, and 2000 pounds of factory and/or Sumo water
  • ballast system. Level load your boat to keep the nose down
  • for the captain’s visibility and a longer wake.
Purchase Wakesurf Edge Mega Wave Foldin
Old Season Product - View New Liquid Force Range
Asset 1

Win Back Your Order!

Sign up to our mailing list so you don't miss out on exclusive deals, latest product drops and more.
Get the chance to Win Back your order!

×

Seen it
cheaper?

Found it for less?

We want you to get the best value for your money. If you see the same product (size & colour) that is in stock at another store let us know and we will do our best to match the price for you. Fill out the form below with the details.

Name
Email
Product
Title
Low Price
URL